DIY!

So I did a lil' DIY project this weekend when I took my dining room chairs and have them a lil update. It was fairly easy :)

All that was needed was
Fabric of choice (I used 2 yards)
Screwdriver/drill
Scissors
Staple gun


1st, I had to flip the chairs over and remover the screws in order to remove the cushions from the chairs.
Next, I measured my fabric and made sure to have enough to completely cover the sides and cut it accordingly..
Finally, I made sure the fabric was straight before using the staple gun to tightly secure the material.
I then took the cushion and screws it back into the chair!